35
BACK DOOR KEY PRESSES
1. System Information
1.1 Press and hold the Volume minus and
Preset 5 buttons to bring up System
Information. Use the Volume minus and plus
button to toggle through the items.
1. MAC address information
1.1 Wi-Fi MAC address 1
1.2 Wi-Fi MAC address 2
1.3 Ethernet MAC address
2. Network Information
2.1 Connected?
2.2 Connection Type
2.3 IP Address
2.4 SSID
2.5 RSSI (Received Signal Strength), rates
Wi-Fi signal received strength
2.6 Channel
3. System Information
3.1 Component ID
3.2 System Serial number
4. SoundTouch Information
4.1 Serial Number
4.2 Software Version
5. SoundTouh Controller Information
5.1 Connected?
5.2 Serial Number
2. Factory Default
2. Press and hold the Volume (-) minus and
Preset 1. The system will return to factory
default settings and reboot.
3. Software Update
3.1 Press and hold the Volume (-) minus and
Preset 4 to initiate a software update.
3.1.1 The unit will download software from
the update over Wi-Fi.
3.1.2 While applying power and holding the
Volume minus and Preset 4 button, the
unit will load software from a thumbdrive
inserted in its USB port.
4. Alternate Setup (connect unit to Wi-Fi
network)
4.1 Press and hold the Volume (-) minus and
Preset 2 to initiate alternate setup mode.
4.2 Connect a smartphone to the unit’s
Bose
®
Soundtouch Wi-Fi network.
4.3 The units Wi-Fi setup page IP address
will be shown on the unit’s display. Enter the
IP address into smart phone browser and
follow the directions on the page.
5. Disable/Enable Networking
5.1 Press and hold the Volume (-) minus and
Preset 3 to enable or disable networking.
To Next Page
Loading...
