English - 19
7. Remove the screws that secure the battery pack.
8. Remove the old battery and gently slide the new battery into the compartment.
9. Replace and tighten the screws on the battery pack.
Note: Tighten the left screw first to ensure the battery's pins align with the
connectors inside the compartment.
10. Align the cover's hooks to the tabs and press the cover down.
11. Replace and tighten the screws on the cover.
12. Connect the system to AC power and fully charge the battery (about three
hours).
Note: The battery status icon on the display indicates charging status. To
check the battery's charge level, press
on the button pad for 2
seconds.
20 V
To Next Page
Loading...
