Bose SoundTouch Portable Series II User Manual

English - 33
Appendix: Using a Computer for Setup
Important setup information
• You can set up your system using a computer rather than a smartphone
or tablet.
• Use a computer that is on your Wi-Fi
®
network.
• Use a computer where your music library is stored.
• You need the provided USB cable.
*
• Do not connect the USB cable until the app instructs you to connect the cable.
* The SETUP A USB connector on the back of the system is for computer setup only. The USB
connectors are not designed to charge smartphones, tablets, or similar devices.
Using a desktop computer for setup
If you are using a desktop computer, move the system near the computer to set up
your system. During setup, the app prompts you to connect the USB cable from
the computer to the system (temporarily).
After setup, disconnect the USB cable from your computer and from your system
and move the system to its permanent location.
Setting up the system using a computer
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to
SoundTouch.com/app
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch
™
app.
The app guides you through setup.

Bose SoundTouch Portable Series II Specifications

General

Control type	Buttons
Volume control	Digital
Remotely operated	Yes
Supported radio bands	Not supported
Built-in storage media	No
Audio formats supported	AAC, MP3, WMA
Internet radio services supported	iHeartRadio, Pandora, Spotify
Network streaming services supported	Pandora
Display type	OLED
Product color	Black, White
RMS rated power	- W
Number of drivers	-
Audio output channels	2.0 channels
Wi-Fi standards	802.11b, 802.11g
Cables included	AC, USB

Weight and Dimensions

Depth	64 mm
Width	249 mm
Height	147 mm
Weight	1400 g