16 - English
Setting up the System
Connect the speakers
What you need:
Acoustimass
®
Module Speaker cables
Note: See “Appendix A: Acoustimass
®
connector panel” on page 31 for details.
1. Lay the Acoustimass
®
module on its side. Insert the L (gray) speaker cable into
the L (gray) connector on the Acoustimass
®
module.
2. Insert the other end of the L (gray) speaker cable into the left speaker
connector, with the label facing down.
3. Insert the R (blue) speaker cable into the R (blue) connector on the
Acoustimass
®
module.
4. Insert the other end of the R (blue) speaker cable into the right speaker
connector, with the label facing down.
5. Reconnect the Acoustimass
®
module power cord to AC (mains) power.
Left (L, gray)
Right (R, blue)
Right speaker
Left speaker
Acoustimass
®
module
Note: You can place system speakers on wall brackets, table stands or floor
stands. To purchase these accessories, contact your local Bose
®
dealer or
visit www.Bose.com.
To Next Page
Loading...
