Bose Wave music system - Setting Up Your Wave Music System; Connecting to Power

4
Français Español English
Setting Up Your Wave
®
Music System
Unpacking
Please check the shipping carton for the following items:
Selecting a location
• Place your Wave
®
music system on a table or other flat surface.
• To enjoy maximum performance, place your Wave
®
music system across the room from
where you will be listening.
• For best performance, place your Wave
®
music system within two feet of a wall, and avoid
placing directly in a corner.
Note: Do not place your Wave
®
music system on a metal surface. It could interfere with
AM reception.
Note: Do not place your Wave
®
music system on a heat-sensitive surface. Like all electrical
equipment, it generates some heat.
Note: Do not use your Wave
®
music system in a damp location or any other place where
moisture can get inside.
Connecting to power
1. Insert the small end of the power cord into the connector labeled AC POWER on the rear
panel of your Wave
®
music system.
2. Plug the power cord into an electrical outlet.
Wave
®
music system
AC power cord
Demonstration CD
Remote control
(battery pre-installed)
®
1
2
AC POWER connector
WRCDOG.book Page 4 Monday, July 26, 2004 11:51 AM