What causes low audio output on my Boss Audio Systems Receiver, and how can I fix it?
Low audio output on your Boss Audio Systems Receiver may be caused by a heavily biased volume balance. Check and adjust the channel balance to the center position.
What does 'Error' mean on my Boss Audio Systems Receiver, and how do I fix it?
If your Boss Audio Systems Receiver displays 'Error', it indicates an illegal mechanism operation. Press EJECT for 5 seconds to reset the loading mechanism.
Why is there no image on my Boss Audio Systems ELITE BV755B Receiver screen?
If there is no image on your Boss Audio Systems Receiver screen, it could be due to: * An incorrect connection to the parking wire. Check the wiring and correct it. * The parking brake is not engaged. Stop the vehicle in a safe place and set the parking brake ON.
General| Brand | Boss Audio Systems |
|---|---|
| Model | ELITE BV755B |
| Category | Receiver |
| Language | English |
Important statements regarding safe operation and viewing of the device.
Configure general settings like wallpaper, ACC power, system tone, language, and parental lock.
Configure camera trigger, rear camera power, and front camera power settings.
Set the clock mode (12/24 hr), hour, minute, and AM/PM settings.
Adjust internal amplifier, startup volume, tuner, disc, USB, SD, phone, streaming, AUX IN, and AV input levels.
Adjust equalizer, balance, fade, subwoofer, and preset gain levels.
Configure tuner region, auto preset, local/distance, RBDS, and stereo/mono settings.
Control illumination detection, screen brightness, and gamma brightness.
Access touch calibration, view version, reset to factory, or configure boot-up warning.
Configure Radio Data System features like Clock Time, Traffic Announcement, and Auto Frequency.
Access Bluetooth settings, dialing keypad, phonebook, call history, and pairing.
Dial phone numbers using the keypad or directly call contacts.
Manage active calls: show contact, mute/unmute mic, and hang up.
View and search contacts, sync phonebook, and manage call history.
Control music playback: previous/next song, play/pause, and access EQ settings.
Manage paired devices, disconnect, or forget existing connections.
View front camera feed, toggle display with rear camera.
View rear camera feed when reversing, returns to last source.
Connect external audio devices via 3.5mm jack.
Connect external video and audio devices via RCA jacks.
Steps and requirements for obtaining warranty service and repairs.
To Next Page