Boss 950 - Remote Pairing; Initiate Pairing on Control Box; Initiate Pairing on Remote; Pairing Completion and Precautions

http://bossbeds.ca
Very important: Pairing your device must be
completed within 2 minutes; Make sure the other
base in the room is powered off.
Remote Pairing
Attention: All bases are set to the different DIP of the remote for easier use. You need to pair your remote if you
need one remote controls two bases simultaneously. If using only one base normally, proceed to page 14.
Press and hold the "LINK BUTTON" on the control box
untill the LINK LED fashes, then release the "LINK
BUTTON"
STEP 2:
Press and hold simultaneously the Head-Up button and
Foot-Up button on the remote control until backlight LED
flashes, then release the two buttons
STEP 1:
○
○