Boss 950 - Trouble Shooting; Check Wired Connections; Verify Power Supply; Check Remote Batteries

http://bossbeds.ca
If one or more functions on the bed base have stopped operating, please check the bed as
follow:
Trouble Shooting
◎If the power supply is working correctly, unplug the base for 1 hour to reset the electronic components.
◎After the electronic components have been reset, follow the REMOTE SETTINGS steps on page 13 to
reset the base.
◎Check under the bed base to verify that the wired connections are secure and that there are no cords
or bedding obstructing the movement of the base.
◎Check to see if the bed base is connected to the power supply correctly. Make sure the power supply is
connected to the outlet.
◎Ensure the batteries in the remote are new and operable.
1
2
1
2 2 2