Open the headboard bracket accessory package and
confirm that all the pieces listed below are included:
Headboard Brackets [2]
Headboard Connecting Components [2]
Short Bolts (8)
Long Bolts M8 [4]
Large Washers [2]
Small Washers [12]
Hex Key [1]
Long Bolts M10 [2]
Headboard Brackets Installation
The remaining 4 pieces of long bolts (M8) and 4 pieces
of small washers can be used to attach the headboard
bracket to your headboard.
Attach the headboard T-Bar (G) to the headboard
bracket(F) using 4 short bolts and 4 small washers as
per the picture to the right. Use the Hex Key to tighten
the bolts. Repeat this process for the other side of the
base.
Install the headboard bracket (F) using one long bolt
(M10) and one large washer. Install as per the picture to
the right. Use the Hex Key to tighten the bolts. Repeat
this process for the other side of the base.
To Next Page
Loading...