Boss 950 - Memory Setting; Prepare for Memory Setting; Activate Memory Setting Mode; Save Memory Position

While the buttons are flashing, press one of these three
buttons including "MEMORY A"/"MEMORY B"/"ZG" until
the flashing stops. The selected MEMORY FUNCTION is
now set.
Memory Setting
Ensure the base is connected to the power supply
correctly and the remote control works properly. Ensure
the base is in the Flat position. Make sure the massage,
LED light and other functions are turned off.
STEP 2:
Adjust the HEAD and FOOT to your desired position.
Press the "TIMER/ALL OFF" button until all buttons on
the remote are flashing.
STEP 3:
http://bossbeds.ca
STEP 1:
○
○
○
○