10
Operation
Storing Settings (Write Operation)
Even when you carry out a write operation while the MEMORY indicator is lighted
(“MEMORY”), settings made for “MANUAL” are not stored. Be sure to carry out
such operations when the MANUAL indicator is lighted (in the “MANUAL” mode).
Do not switch off the power while a write operation is in progress.
1.
While at “MANUAL,” adjust the equalizer sliders and the level slider to obtain
the desired equalization.
fig.08
2.
Press the LIGHT button and the SELECT button at the same time.
fig.09
The text “WRITE SURE?” flashes in the display, and the unit enters write
standby.
fig.10
* To cancel the write operation, press the MANUAL/MEMORY pedal.
Illuminated
To Next Page
Loading...
