Boss ES-8 - Advanced Applications; Switching Between Two Amps; Switching the Amps Channels; Connecting with the Four-Cable Method; Also Switching the Amps Channels

Advanced Applications
15
Switching Between Two Amps
Parameter Value Reference
Patch parameter
Output Sel 1, 2, 1&2 p. 9
Switching the Amp’s Channels
Parameter Value Reference
Patch parameter
CTL1–6 ON, OFF p. 9
System setting
Play Option: CTL1–6 LAT, PLS p. 12
Output
Buf
Input
Buf
OUT 1/L
OUT 2/R
Guitar
AMP-1
AMP-2
Output
Buf
REV DLY TRE CHO PH DIST OD COMP VOL
Guitar
AMP-2
AMP-1
To: AMP-1 Control
To: AMP-2 Control
Amp channel switching
COMP DIST CHO DLY VOL
OD PH TRE REV
Connecting with the Four-Cable Method / Also Switching the Amp’s Channels
Parameter Value Reference
Patch parameter
CTL1–6 ON, OFF p. 9
System setting
Play Option: CTL1–6 LAT, PLS p. 12
Reducing Hum
Parameter Value Reference
System setting
Preference: Vol Loop Lift LIFT, GND p. 12
Input
Buf
Input
Guitar
PH DIST OD COMP
AMP
Output
Buf
REV DLY TRE CHO
Volume
Loop
SendReturn
Amp’s pre section
Amp’s power section
Guitar
To: AMP Control
Amp channel switching
COMP DIST CHO DLY
OD PH TRE REV
From: AMP Send
To: AMP Input
To: AMP Return