Boss RC-10R Parameter Guide

13
MENU
Parameter Value Explanation
FILTER TYPE
When OUTPUT FILTER is “INPUT & LOOPER”
JC-120 Simulates the character of a Roland JC-120.
KATANA Simulates the character of a BOSS KATANA.
COMBO 112
Simulates the character of a combo-type guitar amp equipped with a 12-inch
speaker.
COMBO 212
Simulates the character of a combo-type guitar amp equipped with two 12-inch
speakers.
STACK 412
Simulates the character of a stack-type guitar amp equipped with four 12-inch
speakers.
ADJUST EQ: LO, HI
-12–0–+12 Adjusts the character of the lter.
OUTPUT MODE
Species how sound is output from the OUTPUT jacks.
STEREO Output in stereo from the OUTPUT jacks.
A:LOOP B:RHYTHM
Output the input and the looper from the OUTPUT A jack, and the rhythm from the
OUTPUT B jack.
DISPLAY CONTRST
1–10 Adjusts the brightness of the display.
AUTO OFF
The RC-10R has a function that turns the power o automatically. When ten hours elapse after you stop playback
or recording, the power turns o automatically. Approximately 15 minutes before the power turns o, a message
appears in the display.
When the unit is shipped from the factory, this function is “ON” (power-o in ten hours). If you want the power to
always remain on, set this “OFF.”
NOTE
When the power turns o, the settings you had been editing are lost. If you want to keep your settings, save them in
advance.
OFF The power does not turn o automatically.
ON The power turns o automatically ten hours after you stop playing or operation.

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g