Boss RC-10R Parameter Guide

17
If you use a USB cable to connect the RC-10R’s USB
port to your computer’s USB port, you can back up the
RC-10R’s data to the computer or restore data from the
computer to the RC-10R.
Connecting the RC-10R and
Computer
1. Use a commercially available USB cable
to connect the RC-10R’s USB port to your
computer’s USB port (a connector that
supports USB 2.0 Hi-Speed).
NOTE
5 This might not work correctly for some models of
computer. Refer to the BOSS website for details on the
operating systems that are supported.
5 Use a USB cable that supports USB 2.0 Hi-Speed.
Transferring Computer Files via
USB (USB Mass Storage)
1. Press the [MENU] button.
2. Turn the [VALUE] knob to select “MASS
STORAGE.”
3. Press the [VALUE] knob.
4. Turn the [VALUE] knob to select “ON.”
5. Use a commercially available USB cable
to connect the RC-10R’s USB port to your
computer’s USB port (a connector that
supports USB 2.0 Hi-Speed).
When a connection with the computer is
established, the message “CONNECTING...” appears.
* USB connection is not possible if the unit is not
stopped, or if there is a phrase that has not been saved.
Connecting a Computer via USB

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g