Boss RC-10R Parameter Guide

7
MENU
Parameter Value Explanation
CTL1 FUNCTION
CTL2 FUNCTION
RHYTHM FILL
Plays a ll-in.
RHYTHM BREAK
Stops rhythm playback, and then resumes it from the next measure.
RHY PTN1/PTN2
Switches between rhythm PTN1 and PTN2 playback. (*1)
LOOPER CONTROL
Same operation as the [LOOP] switch.
LOOPER STOP
Stops the loop. Long-press to clear the phrase.
LOOPER UnRedo
Executes the undo/redo operation.
TRK1 CONTROL
If TRK1 is selected, performs the same operation as the [LOOP] switch of the panel.
(*2)
TRK1 STOP
If TRK1 is selected, stops the loop. Long-press to clear the phrase
TRK1 UnRedo
If TRK1 is selected, executes undo/redo. (*2)
TRK2 CONTROL
If TRK2 is selected, performs the same operation as the [LOOP] switch of the panel.
(*2, *3)
TRK2 STOP
If TRK2 is selected, stops the loop. Long-press to clear the phrase. (*3)
TRK2 UnRedo
If TRK2 is selected, executes undo/redo. (*2, *3)
TRK 1&2 STOP
Stops the two tracks simultaneously.
ALL BREAK
Stops rhythm and looper playback, and then resumes it from the next measure.
TARGET TRACK
Switches the track to select. (*3)
EXP FUNCTION
Species the function of an expression pedal connected to the CTL1, CTL2/EXP jack.
OFF
No operation.
RHYTHM LEVEL
Adjusts the rhythm playback volume.
LOOPER LEVEL
Adjusts the loop playback volume.
TOTAL LEVEL
Simultaneously adjusts the playback volume of the rhythm and the loop.

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g