Boss RC-10R Parameter Guide

8
MENU
Parameter Value Explanation
RHYTHM PREF
CTL1 PREF
CTL2 PREF
EXP PREF
MEMORY, SYSTEM
Species whether the RHYTHM FUNCTION, CTL1/CTL2 FUNCTION, and EXP
FUNCTION settings use the settings made for each phrase memory (MEMORY) or
the settings made for the entire RC-10R (SYSTEM).
*1: Does not switch if RHY PLAY MODE (p. 3) is “PTN1” or “PTN2.”
*2: If LOOP TRACK MODE (p. 4) is “SERIES,” this operates only if the selected track is the same as the controller track. For example, if track 1 is
selected, “TRK1 CONTROL” operates but “TRK2 CONTROL” does not operate.
If LOOP TRACK MODE (p. 4) is “PARALLEL,” this operates even if you operate a controller other than the selected track.
Also, if you operate a controller that is assigned to “TRK1 ***,” the selected track becomes TRK1, and if you operate a controller that is assigned
to “TRK2 ***,” the selected track becomes TRK2.
*3: Does not operate if LOOP TRACK MODE (p. 4) is “SINGLE.”

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g