Boss RC-10R Parameter Guide

15
Switching the Loop Tracks
The way in which the loop tracks switch depends on the LOOP TRACK MODE (p. 4) setting.
Value Explanation
SERIES
Each time you hold down the [RHYTHM] switch and press the [LOOP] switch, TRK1 and TRK2 are
switched.
* If SYNC SWITCH (p. 3) is “ON” and RHY PLAY MODE (p. 3) is set to “PTN10PTN2” or
“PTN20PTN1,” rhythm patterns PTN1 and PTN2 also switch simultaneously when you switch
loop tracks.
PARALLEL
Each time you hold down the [RHYTHM] switch and press the [LOOP] switch, the current track (the
track whose LOOP indicator is blinking) is switched.
You can record, overdub, or play back the current track.
If both TRK1 and TRK2 have been recorded and the looper is stopped, you can select both TRK1 and
TRK2 simultaneously (LOOP indicator TRK 1 and TRK 2 blink).
In this case, pressing the [LOOP] switch plays TRK1 and TRK2 simultaneously.
SINGLE The loop track does not switch.
Other Operations

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g