Bostitch S32 User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
103693REVH 10/06
STANLEY FASTENING SYSTEMS L.P.
S32
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE PNEUMATIQUE
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE
A
TTENTIVEMENT LE PRÉSENT MANUEL
A
V
ANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
A
VERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS
A
VEZ DES QUESTIONS, CONT
ACTEZ VOTRE REPRÉSENT
ANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.

Bostitch S32 Specifications

General

Brand	Bostitch
Model	S32
Category	Power Tool
Language	English

Summary

Introduction and Warranty

Introduction

Overview of the Bostitch S32 series tacker tools and their capabilities.

Limited Warranty

Details the warranty for Bostitch pneumatic staplers and nailers in the US and Canada.

U.S. and Canada Warranty Terms

Specifies coverage, limitations, and transferability of the limited warranty.

Safety Instructions

General Safety Precautions

Essential safety precautions for operating pneumatic tools, including protection.

Eye and Additional Safety Protection

Requirements for eye, hearing, and head protection when using the tool.

Air Supply and Connections

Air Supply Guidelines

Guidelines for connecting and maintaining air supply for the tool.

Air Supply Details

Further details on fittings, hoses, supply source, regulator, and filter.

Tool Specifications and Operation Modes

S32 Tool Specifications

Technical details including model, dimensions, weight, and fastener compatibility.

Fastener and Air Specifications

Details fastener compatibility, air fitting, operating pressure, and air consumption.

Operation Modes Overview

Describes the different trigger operation types available for the tool.

Contact, Sequential, and Dual Trigger Operation

Explains the functionality of each operation mode and their identification.

Lubrication and Cold Weather Operation

Lubrication Recommendations

Guidance on proper lubrication for optimal tool performance and longevity.

Cold Weather Precautions

Recommendations for operating and storing the tool in cold weather conditions.

Loading the S32 Tool

Fastener Loading Procedure

Details the process of disengaging the latch, inserting staples, and closing the guide unit.

Tool Operation Details

Operation Mode Usage

Step-by-step usage instructions for Dual Trigger, Contact Trip, and Sequential Trip modes.

Tool Operation Check

Procedures to verify the correct functioning of the tool's operation modes.

Verification of Operation Modes

Steps to test Dual Trigger, Contact Trip, and Sequential Trip mechanisms.

Additional Safety Warnings

Further safety guidelines and precautions for safe tool usage.

Maintaining the Pneumatic Tool

Parts, Seals, and Air Supply

Guidance on replacement parts, seal assembly, and ensuring adequate air supply.

Trouble Shooting

Accessories Available