Bostitch SL1838BC User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL
TO UNDERSTAND AND FOLLOWTHE SAFETYWARNINGS AND INSTRUCTIONS.KEEP
THESE INSTRUCTIONSWITHTHETOOL FOR FUTURE REFERENCE. IFYOU HAVE ANY
QUESTIONS, CONTACTYOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN
ESTUDIAR ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS
ADVERTENCIAS SOBRE SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS
INSTRUCCIONES CON LA HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE
ALGUNA DUDA, COMUNÍQUESE CON SU REPRESENTANTE DE BOSTITCH O CON SU
DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL.
PRÉTER UNE ATTENTIONTOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET
AUX AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR
RÉFÉRENCE. SI VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT
OU VOTRE CONCESSIONNAIRE BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
SL1838BC
BOSTITCH CAP STAPLER
CONJUNTO DE GRAPADORA DE SOMBRERETES BOSTITCH
NÉCESSAIRE D’AGRAFEUSE DE CAPUCHON BOSTITCH
STANLEY FASTENING SYSTEMS
188677REVA 10/09

Bostitch SL1838BC Specifications

General

Brand	Bostitch
Model	SL1838BC
Category	Power Tool
Language	English

Summary

SAFETY INSTRUCTIONS

Safety: Air Supply & Connections

Guidelines for connecting the tool to the air supply, including warnings about improper gas sources.

Safety: Operation

Safe operating practices for using the pneumatic tool, including handling and trigger use.

Safety: Maintenance

TOOL OPERATION

TRIP OPERATION MODE

Explanation of the two trigger modes: Contact Trip and Sequential Trip.

SELECTING THE TRIP MODE

Instructions on how to change the tool's trip mode between Contact and Sequential.

AIR SUPPLY AND CONNECTIONS

OPERATING PRESSURE

LOADING STAPLES

TO PREVENT ACCIDENTAL INJURIES

Crucial safety rules to prevent accidental firing or injury during loading.

Loading the Staples

DIAL-A-DEPTH™™ FASTENER CONTROL ADJUSTMENT

TRIGGER LOCKOUT CONTROL

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

General Safe Operation Guidelines

TOOL OPERATION CHECK

1. CONTACT TRIP OPERATION

Procedure to check the operational safety of the Contact Trip mode.

2. SEQUENTIAL TRIP OPERATION

Procedure to check the operational safety of the Sequential Trip mode.