Boston Scientific Vercise DBS Remote Control 3 Directions For Use

Troubleshooting
Vercise™ DBS Remote Control 3 Directions for Use
92104389-01 21 of 27
Troubleshooting
Telemetry Help
Common sources of interference, such as televisions and computer monitors, can affect wireless
communication. You will continue to have access to the Remote Control menus even if the Remote
Control is outside its effective communication range. If you enter a command to change your settings
or programs while the Remote Control is outside of its effective communication range, you will have
several seconds to move the Remote Control within range of the Stimulator to send the command.
After the command is received by the Stimulator, the Remote Control will make a double-beep then
display the requested change on the screen. If the Remote Control is unable to communicate with the
Stimulator, the Telemetry Error message will appear:
Telemetry Help
Communication
Failed
SelectCancel
Retry
Telemetry Error
?
?
To retry communication with the Stimulator – this resends the last command – select Retry .
To cancel communication and return to the screen, press .
The Telemetry Help tool is also available to assist you in improving communication between the
Remote Control and the Stimulator. To use the Telemetry Help tool, select Telemetry Help
?
. The
following screen will be displayed:
Test the Remote
at Dierent
Positions
Press to Exit

Boston Scientific Vercise DBS Remote Control 3 Specifications

General

Brand	Boston Scientific
Model	Vercise DBS Remote Control 3
Category	Medical Equipment
Language	English