ACCESSORIES
FOR COMPLETE DETAILS VISIT WWW.DETECTING.COM • 1-800-413-4131
Bounty Hunter
®
Carry Bag
Rugged double-stitched construction - CBAG-W
Bounty Hunter
®
Pouch & Digger Combo
Pouch with 2 large pockets & 9” heavy duty digging tool. TP-KIT-W
Stereo Headphones
Use with Bounty Hunter metal detectors. Lightweight and adjustable with
true stereo sound, adjustable volume, 1/4 jack with 1/8 adaptor,
4’ cable.
HEAD-W
Pin Pointer
Pinpoints the exact location of buried metal objects. Audio signal indicator
and vibrator. Runs on (1) 9-Volt Battery. PIN POINTER-W
Bounty Hunter
®
Sand Scoop
Large scoop with filtering holes. Made of strong plastic. SAND SCOOPBH
Replacement/Accessory Searchcoils
10” Magnum Coil – 10COIL
8” Replacement Standard Coil – 8COIL-7BLK
4” Gold Nugget Coil – 4COIL
Coil Covers
Protect your coil from abrasion and damage.
10” Coil Cover – 10COVER
8” Coil Cover – 8COVER-N
4” Coil Cover – 4COVER
9” Heavy-Duty Digging Tool
Metal blade with comfortable plastic handle and depth gauge TROWEL-2
Digging Tool
Light and practical wide blade digging tool. TROWEL-W
Bounty Hunter
®
Baseball Cap
One size fits all, with Bounty Hunter
®
logo. BHCAP
Bounty Hunter
®
T-Shirt
100% cotton with Bounty Hunter
®
Logo.
Sizes – S, M, LG, XL & XXL. BHTSHIRT
Gold
Prospecting Kits
OWNER’S MANUAL
MSS2B Rev.4 082313
The Sharp Shooter II is a professional
metal detector. The concepts and terminology
can be quite unfamiliar if you are new to the hobby.
To understand it quickly and to get the most enjoyment
possible from your detector, we strongly recommend
that you:
1)
Turn the Sensitivity knob to a low setting if you get false signals. A
little practice is required to understand when and how you can use the
sensitivity at or near 100%.
2)
Do not use indoors. This detector is for outdoor use only. Many
household appliances emit electromagnetic energy, which can
interfere with the detector. If conducting an indoor demonstration,
turn the sensitivity down and keep the searchcoil away from all floors,
walls and metal objects.
3)
Do not test by placing coins on the floor. Most floors contain metal.
4) Read this manual.
Most importantly, review the Summary of Operating Modes.
5) Sweep the searchcoil from side-to-side. Coil motion is required in the
motion modes to detect metal.
6) Use 9volt
ALKALINE batteries only.
Do not use Heavy Duty batteries.
Do not use normal Zinc-Carbon batteries.
7) Operating Frequency: 6.5 kHz
To Next Page
Need help?
General
