BÖWE M30 - Additional Lint Filter

69
M21-M26-M30
11. Maintenance 11.
Sequence of the maintenance work on the button trap:
 Remove strainer insert
 Clean strainer insert
 Clean additional round sieve
 Reinsert sieve cartridge
Attention: Never work without a strainer insert - the pump could
be damaged by foreign bodies!
Attention: Perform maintenance only when the machine has been
turned off and after the drying has finished.
 Then insert the lint filter basket and make sure that it seats firmly in place
 Clean the cover seal
 Firmly close the cover of the common maintenance opening
11.5.2 Additional Lint Filter
Check the additional filter daily:
 Open the cover on the airshaft
 Remove the filter, suction it off, or, alternatively, clean it with a brush (wash if needed).
 Replace the additional filter.
 Close the cover