6
TROUBLESHOOTING GUIDE
• The Hold Down Straps should be next to
the lower screw holes. See Figure 2.
• The “L” or “R” sticker should be at the
lower edge of the platform. See Figure 2.
The“L” sticker should be on the left-hand
side and the “R” sticker should be on the
right-hand side. (However, the platforms
may be mislabeled or the stickers may be
missing.)
1-4 Attach the Towel Bar (#9) to the Dumbbell
Platforms (#7 and #8) using the hardware
from Step 1-1. See Figure 3.
1-5 Tighten all hardware completely.
Figure 2 – Correct Assembly
Stickers
Screw
holes
Hold Down
Strap
Figure 3 – Installed Towel Bar (bottom view)
To Next Page
Loading...
