59
8. Using a pair of wire cutters, cut the zip-ties (indicated by ovals) that
secure the cable to the Frame.
9. Make sure that there is safe clearance around, above, and to one side
of the treadmill. Tilt the machine onto the side being sure not to grasp the
Console.
A second person is required to assist with the tilting of the
machine. Do not tilt the machine unless the walking deck is in
the folded, locked position. Be sure there is adequate clear-
ance for the raised deck. Some components of the equipment
can be heavy or awkward. Enlist the service of a second
person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your
own.
To Next Page
Loading...
