98
22. With the Securing Ball attached, safely release the Lower Rope.
23. Re-assemble the machine in the reverse order of when the parts
were removed.
24. Final Inspection
Inspect your machine to ensure that all hardware is tight and compo-
nents are properly assembled.
Do not use until the machine has been fully assembled
and inspected for correct performance in accordance
with the Owner’s Manual.
20. To attach the Lower Left Rope Stopper, pull the end of the new Lower
Left Rope through the frame and attach the Stopper. Set the Stopper into
the frame.
21. Using the routing wire, slowly pull the Lower Left Rope through the
Left Platform Frame and attach the Securing Ball.
To Next Page
Loading...
