EasyManua.ls Logo

Bowflex Max Trainer M7 - Replace the Fan Assembly

Bowflex Max Trainer M7
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
79
Replace the Fan Assembly on the
Bowflex Max Trainer
®
M7
Skill Level: II
8010255.031517.C
Replacement Procedure
NOTICE: ThisdocumentprovidesinstructionsforthereplacementoftheFanAssemblyontheBowexMaxTrainer
®
M7.
If you need assistance, please call Bowflex Customer Service at 1-800-605-3369.
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all
Warnings on this machine.
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all
Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause
injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
•Makesurethattherepairisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.
• Disconnect all power and allow to sit for 5 minutes before you service this machine.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a
risk to users, keep the machine from operating correctly and will void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replac-
ing components. If necessary request replacement warning stickers or placards from Nautilus customer service.
• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
•Donotusethemachineuntilallshrouds,instructions,warninglabelsandcorrectfunctionalityhavebeenveriedandtestedforcorrectperformance.
•Thisproductcontainsmagnets.Magneticeldscaninterferewiththenormaluseofcertainmedicaldevicesatacloserange.Usersmaycomeintoprox-
imity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is
important that you consult with your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial
Number” section in the Owners Manual to determine the location of the magnets on this product.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2015 Nautilus,
Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and Bowflex Max Trainer are trademarks owned by or
licensed to Nautilus, Inc.
Tools Required (not included)
#2 Phillips screwdriver
5mm hex wrench
Standard Screwdriver

Table of Contents

Other manuals for Bowflex Max Trainer M7

Related product manuals