Bowflex SelectTech 2080 - Installation Guide Manual

Bowex
™
SelectTech
™
Weight Upgrade
Installation Guide
8022768.120119.A
Installation Guide
Refer to the Bowex
™
SelectTech
™
2080 Barbell with Curl Bar Assembly/Owner’s Manual for complete safety
instructions.
Important Safety Instructions
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on the equipment.
• Carefully read and understand the Assembly and Owner’s Manual.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void
the warranty.
• Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Contact Customer
Service (if inside US/Canada) or your local distributor (if outside US/Canada) for repair information.
• If replacement parts are necessary use only genuine Nautilus replacement parts and hardware. Failure to use genuine replace-
ment parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s
Manual.
• The Barbell/Curl Bar is very heavy. If you are not using the optional Barbell Stand, put the Barbell/Curl Bar assembly directly
on the oor for best support.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury.
If you need assistance, contact Customer Service (if inside US/Canada) or your local distributor (if outside US/Canada).
To nd your local international distributor, go to: www.nautilusinternational.com
Nautilus, Inc., 5415 Centerpoint Parkway, Groveport, OH 43125 USA, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.
com | Nautilus (Shanghai) Fitness Equipments Co, Ltd, Room 1701 &1702, 1018 Changning Road, Changning District, Shanghai, China 200042, www.nautilus.
cn - 86 21 6115 9668 | outside U.S. www.nautilusinternational.com | Printed in China | © 2019 Nautilus, Inc. | Bowex, the B logo and SelectTech are trademarks
owned by or licensed to Nautilus,Inc., which are registered or otherwise protected by common law in the United States and other countries. |
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
™
™
Tools
6 mm
#2
Parts
5-lb (2.27 kg) Weight Plates (qty 8)