Bowflex SelectTech 4.1 - Step 4: Install Leg Hold Down Attachment; Step 5: Final Inspection

Assembly
Step 4: Install Leg Hold Down Attachment
B
H
H
G
I
4
5
6
6
I
6 mm
X2
X2
Step 5: Final Inspection
Inspect your equipment to ensure that all fasteners are tight, the equipment is level, and
components are properly assembled. If necessary, adjust the feet until they are evenly balanced
in contact with the floor.
Do not use the equipment until the equipment has been fully assembled and
inspected for correct performance in accordance with the Owner’s Manual.
Note: Record serial number in the Serial Number field at the beginning of this manual.
11