Bowflex®SelectTechT"Dumbbell
maintenance:
The Bowflex SelectTech Dumbbell is a very low mainte-
nance product. However, there are steps that you should
take to keep the product performing and looking its
very best.
2_
Should your SelectTech Dumbbell handle assembly,
plates or base become soiled you may clean them
with a rag lightly dampened with warm water and
a small amount of mild soap. _¥ipe dry with a
separate rag.
The SelectTech Dumbbell is internally lubricated
and will not require further internal lubrication. The
contact between weight plates and selection discs is
not lubricated but has naturally low friction. This
generally will not require any lubrication. Should you
feel it necessary to lubricate tile weight plates and/or
selection discs, use only a silicon lubricant, preferably
"food grade".
1. Do not use any solvents, harsh detergents,
chemicals or bleach on this product- doing so may
damage tile materials, resulting in degradation of
the products performance or strength.
2. Do not attempt to disassemble tile dumbbell
handle or base assembly. These items are not designed
to be user serviced. Doing so will void tile
manufacturers warranty. Contact your Bowflex
retailer or Bowflex directly for service.
II
To Next Page
Loading...
