5
MAIN PARTS INCLUDED:
F 1 Main Frame
F 1 Console Base
F 1 Console
F 2 Console Masts
F 2 Console Mast Covers
F 1 Tablet Holder
F 1 Cross Bar
F 2 Handlebars
F 2 Pulse Grip Handlebars
F 1 Hardware/Tool Kit
F 1 Safety Key
F 1 Bottle of Silicone Lubricant
(for 2 applications)
HARDWARE KIT:
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove the
plastic wrap from console masts.
WARNING
WARNING
NOTE: Have 2 people available for assembly, this will make the assembly process easier.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such
as lithium bike grease is recommended.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
Never open box when it is positioned upside-down or on its side.
Unpack and assemble the unit where it will be used.
The enclosed treadmill is equipped with high-pressure springs which can cause the
lower base frame to spring open if mishandled.
If you have questions or if there are any missing parts,
contact Customer Tech Support.
NEED HELP?
A
Guide Bolt
M8x28.5L
Qty: 2
B
Bolt
M8x70L
Qty: 8
C
Spring Washer
Ø
8x
Ø
13
Qty: 29
D
Flat Washer
Ø
8.2x
Ø
15
Qty: 23
E
Bolt
M6x15L
Qty: 4
F
Bolt
M8x15L
Qty: 19
G
Arc Washer
Ø
8.2x
Ø
18
Qty: 6
J
Bolt Cap
Qty: 2
I
Bolt
M8x60L
Qty: 2
H
Bolt
M4x10L
Qty: 3
Tool Kit
5mm L-Wrench
6mm L-Wrench
8mm T-Wrench
Screwdriver
To Next Page
Loading...
