the Hydraulic Cylinder Workout Settings while belts are in motion. To do so could result in injury.
Before children are allowed to use the equipment, their mental and physical development should be
taken into account through consultation with their doctor, who must approve any exercise program
before a child attempts it. Keep all cords away from heated surfaces. And it gives your workout area
a clean, finished look. Select Your Workout area Select where you are going to put your Bowflex
TreadClimber exercise machine carefully.Speed pickup wire from left rear roller casting.NOTE
Locking lever must be all the way to the top of the front
plate.http://slavutich-media.ru/userfiles/file/diadem-script-manual.xml
If not fully engaged the treadles may unlock during workout.Firmly connect the electrical cable at
the bottom of the right upright support to the cable on the right side of the base upright bracket see
Figure 83.Tightening in this order will result in a tighter fit.Inspect all attachments you have made
thus far and tighten all bolts securely before proceeding to Step 12.Return Authorization will be
granted if a. You purchased your Bowflex Nautilus, Inc.; and b. You are calling within 30 days of the
delivery date of your merchandise. Always include an explanation of the problem with service
shipments. Your answers are important to us.What We Will Do During your Warranty Coverage
Period, Nautilus, Inc.Adjusting Workout Level Settings If you wish to change your Workout Level
Settings during a workout, you must get off the machine before changing the settings. NOTE As with
all exercises and fitness regimens, always use your best judgment when increasing intensity or
endurance.This assures that each belt travels at the same speed. Further, the treadles are
interconnected, which provides a balanced relationship between the left and right sides during the
workout to give the most cushioned effect to your joints. While you may use your TreadClimber.
NOTE If you are new to the Bowflex workout at a slower speed, gradually increasing belt speed as
your endurance and fitness levels increase. Try a more gradual drinking of the cold water. You may
have been consuming it too quickly.You should realize by now the benefits of consuming plenty of
water each day. Make your water bottle a permanent part of your lifestyle.TC1000 Console Assembly
not illustrated Electronics Tether Housing Assembly Upright Junction Covers. Nautilus, Inc., World
Headquarters, 16400 S.E. Nautilus Drive, Vancouver, Washington, USA 98683. TreadClimber,
Bowflex, and the Bowflex Logo are either registered trademarks or trademarks of Nautilus, Inc.
All marks not listed above are either registered trademarks or trademarks of their respective
companies. We have 3 Bowflex TreadClimber TC1000 manuals available for free PDF download
Assembly And Owners Manual, Assembly Manual, Service Manual. Offers not available with any
other offers and are subject to availability and may change at any time. Prices are subject to change.
Shipping discount applies to standard shipping option only. Offers are valid once to a customer and
excludes previously placed orders. Offers are not valid at retail stores or outlets. Offers valid for a
limited time only.Offers not available with any other offers and are subject to availability and may
change at any time. Offers valid for a limited time only.Please turn it on so that you can experience
the full capabilities of this site. For example, the power cord is plugged into the incoming power
plug at the back of the base. READ ALL INSTRUCTIONS BEFORE USING THE MACHINE 7!2.. Page
7 Important Safety Precautions 10. Keep your hands on the support handlebars and stand as close to
the front of the machine as is comfortable in order to remain in balance on the treadles. 11. Never
convert from or into treadmill mode while the belts are in motion or the machine is powered up.
Turn off power, unplug cord from wall outlet, line up the treadles, and then lock or release the
treadle locking lever. 12. Never adjust the Hydraulic Cylinder Workout Settings while belts are in
motion. Always ATTACH the safety key clip to your clothing during your workout. It is the sole
responsibility of the owner to ensure that regular maintenance is performed. Speed pickup wire
from base. Speed pickup wire from left rear roller casting. Page 27 Assembly Guide Step 19
CALIBRATION PROCESS TC3000 and TC5000 only 7!2.. Failure to calibrate your machine prior to
use could result in machine failure and could cause injury. Page 28 Assembly Guide 197 R elease the
POWER and SLOWER buttons.
To Next Page
Loading...
