5
Receiver
1. Status indicator
Unpaired: Blinking blue slowly.
Paired: Static blue.
Low battery: Blinking red quickly.
Charging: Static red.
Fully charged: Red light off.
2. Power button
Press and hold to power on or off.
3. Mono/stereo toggle
The output mode can be set to either mono
or stereo. When in mono mode, the audio
from the capsule, or capsules will be mixed to
both the left and right sides. When in stereo
mode, the two capsules’ audio output will be
separated to the left and right sides.
4. Contacts
5. Clasp
6. Charging contacts
7. USB-C charging port
For charging the receiver. An external device
can be powered and charged through this
port while the receiver with a USB-C or iOS
Lightning adapter is plugged into it.
8. MFi Certified Lightning Adapter
It can be connected to an iOS Lightning
device.
9. USB-C adapter
It can be connected to Android smartphones,
tablets, computers, and other USB-C devices.
10. 3.5mm TRS adapter
It can be connected to cameras, recorders,
mixers, or other devices with a 3.5mm TRS
jack.
To Next Page
Loading...
