Bpt Agata V - Internal Intercom System; Calling Internal Receivers

Int. 1
Int. 1
Page 6 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Intercom (Agata VC/B - Agata VC/B-L only)
To call an internal receiver,
pick up the handset and press
the button for the receiver you
want.
During a conversation between
internal receivers, a call from
an entry panel is signalled to
the receivers with a beep that
is repeated every 5”.
3 successive beeps indicate
that it is not possible to make
calls because the line is busy.