Concierge desk functions (Agata VC/B - Agata VC/B-L only)
The functions described in this chapter are only available in systems equipped with a
concierge desk.
Call from concierge notification
When the Aux2 LED is on, this indicates that
the concierge wants to be called back.
The LED turns o when communication with
the concierge begins.
Press the button for at least 2 seconds;
the receiver beeps and the red LED turns on
to confirm that the panic signal has been sent
to the concierge, together with the caller’s
number. The receiver LED stays on until the
concierge calls the user back.
The panic signal takes priority over all calls.
Panic button function
Alarm signal
When an alarm contact connected to
the relevant receiver input is activated,
this sends a signal to the concierge and
the receiver beeps intermittently for
approximately 10 seconds.
Decommissioning and disposal. Dispose of the packaging material and the device at the end of
its life cycle responsibly, in compliance with the laws in force in the country where the product is used.
The recyclable components are marked with a symbol and the material's ID marker.
THESE INSTRUCTIONS MUST BE ATTACHED TO THE DEVICE; THE DATA AND INFORMATION ARE TO BE CONSIDERED AS SUBJECT
TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING.
To Next Page
Loading...
