Need help?Do you have a question about the Bpt XT/200 and is the answer not in the manual?
General| Model | XT/200 |
|---|---|
| Wiring System | 2-wire |
| Color | White |
| Type | Intercom System |
| Material | Plastic |
| Audio | Full duplex audio |
Lists the factory preset values for call volume, melody, hands-free volume, etc.
Step-by-step guide to save phone numbers for one-touch dialing.
Procedure to save a service call number for frequent use or special codes.
Instructions on how to adjust the R key (flash) timing.
How to configure the duration of pauses during dialing sequences.
Guide to switch between DTMF and pulse (DEC) dialing modes.
Steps to adjust the ringing volume to desired levels.
How to select one of the available ring melodies.
Configure the telephone for compatibility with specific audio/video entry systems.
Procedure to restore all programming to factory default values.
Instructions on how to place a standard telephone call.
Guide for initiating and conducting calls without lifting the receiver.
Explains how to use the Mute key to temporarily disable the microphone.
Details when and how to use the R key for switchboard operations.
How to redial the last dialed number using the RP key.
How to use the Service key for quick dialing of stored numbers or area codes.
Instructions for speed dialing using programmed one-touch keys.
Adjusting speaker volume during hands-free conversations.
Describes specific keys for interacting with entry control systems.
To Next Page
