Bpt XT/200 - Selecting the type of unit for audio;video entry; Resetting default settings

PROGRAMMING
27
ENGLISH
Selecting the type of unit the
telephone is to be connected
to for the AUDIO/VIDEO
entry functions
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING key.
Press key 7.
Press key 1 if the telephone is
connected with the bpt telepho-
ne interface.
Press key 2 if the telephone is
connected with a CT1/6 or
CT2/8 PABX telephone switch-
board.
Press key 3 if the telephone is
connected with a CT1/6U,
CT2/8U or CT2/8E PABX tele-
phone switchboard.
Press key 7 to complete the
setup.
Press the PROGRAMMING key.
Replace the receiver
or
press the hands-free key.
7
3
2
1
7
Resetting default settings
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING
key.
Press key 0 twice.
Press the PROGRAMMING
key.
Replace the receiver
or
press the hands-free key.
WARNING. This operation causes all the
stored telephone numbers to be deleted.
0
0
XT/200 2403-7422 11.2001 31-05-2002 11:32 Pagina 27