Need help?Do you have a question about the Bpt YKP/301 and is the answer not in the manual?
Essential safety guidelines and operational recommendations before starting installation.
Step-by-step guide for installing the wall bracket using figures 1-5.
Instructions for fitting the monitor module onto the wall bracket using figures 6-7.
Procedure for detaching the monitor module using a screwdriver via the housing slot.
Steps to remove the YKP cover using a screwdriver via the designated slot.
Details the purpose and connections for CN1, CN2, CN3, and CN4 connectors.
Configuration for attenuating call signals via SW1 switch.
Setting the resistive load termination using the SW3 switch.
Option to select the power source (BUS or LOCAL) using SW9 switch.
Configuration for setting the device as MASTER or SLAVE using SW8.
Adds 3 buttons for intercom calls or auxiliary controls.
Module for attenuating ring tones with an indicator light.
Optional supplementary loudspeaker unit.
Support for mounting the unit on a tabletop.
Steps to enter the device programming mode by pressing button A.
Procedure to select the melody for calls from the entry panel.
Procedure to select the melody for calls from the doorbell.
Setting the number of call rings (1-6) for the device.
Guidelines for environmentally responsible disposal of packaging and equipment.
To Next Page
General
