24
CARE & CLEANING
Warning
- Do not immerse the appliance, the plug or the power cord in water or other liquids.
Clean with a damp cloth.
- Make sure the power cord has been unplugged before cleaning.
- Even when the appliance is not in use, unplug it from the electrical outlet before
inserting or removing individual parts or before cleaning it.
- Let it cool down before proceeding with the cleaning.
- Never use metal utensils to remove anything from the pan, because they can damage
the non-stick coating.
- Never use metal utensils to remove the bread from the pan (L), in order to avoid
damaging the non-stick coating.
1. Clean the pan (L) rubbing the inside and the outside with a damp cloth.
2. If the kneading blade (I) does not come off from the motor shaft exceptionally fill the pan
with hot water and leave it for about 30 minutes. The blade must then be cleaned gently
with a damp cloth.
3. Wash the measuring cup (M), the measuring spoon (N) in hot soapy water.
4. Clean all other surfaces, internal and external, with a damp cloth. Use a small amount
of liquid detergent if necessary, but be sure to rinse it completely, otherwise detergent
residues could compromise the successful outcome of your next bread
NOTE:
Do not use any abrasive material or sharp utensils to clean the Bread maker
or any of its parts.
NOTE: Allow all parts and surfaces to dry thoroughly before using the appliance again.
To Next Page
Loading...