DIGGING CHAIN OPTIONSDIGGING CHAIN OPTIONS
DIGGING CHAIN OPTIONSDIGGING CHAIN OPTIONS
DIGGING CHAIN OPTIONS
2.00" PITCH DIGGING TOOTH STATION BREAK DOWN
JJ
GENERAL INFORMATION
The following diagrams are the complete parts break downs of all the
different digging tooth arrangements used on the digging stations for 2.00" pitch
chains. The diagrams are frontal views according to the digging chain direction
of travel. All 2.00" pitch chains are made up of a combination of some or all of
these various digging tooth arrangements. See the "2.00" Pitch Digging Tooth
Station Sequence Charts" (located earlier in this section) to find out how the
arrangements are used for the various digging chains.
DIRT TOOTH, LEFT
PART #54431
DIRT TOOTH, RIGHT
PART #54432
1.56" SPACER TUBE
PART #54628
3.25" CAPSCREW
PART #1347
WITH NUT #1692
DIRT TOOTH, LEFT
PART #54431
DIRT TOOTH, RIGHT
PART #54432
1.81" SPACER TUBE
PART #54440
3.25" CAPSCREW
PART #1347
WITH NUT #1692
CENTER CUTTER, RIGHT
CENTER CUTTER, LEFT
6" LEFT STATION 6" RIGHT STATION
5809
3-2-92
To Next Page
Loading...