EasyManuals Logo

Brady TLS2200 User Manual

Brady TLS2200
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
29
Tutorial Guide
The following pages will provide step-by-step instructions for creating and printing labels
using a variety of different printer functions. With the exception of “Creating a Terminal
Block Label”, the label part used in all tutorial examples is PTL-19-423. A sample roll of
this 1” x 1” label is provided in your TLS2200Thermal Labeling System package.
Creating a One-Line Legend, Component Marker
Legend to be printed: 100A
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
1. Check the STATUS BAR to make sure the unit is in Component mode. If not, press
<Shift> + <0> to toggle from Wiremarker mode to Component mode.
2. Enter 100A on line 1. (Font will be set at default size - 9)
3. Press <Print>.
Creating a Component Label Utilizing Multiple Font Sizes
Legend to be printed: MULTIPLE
FONT
SIZES
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
1. Press <Legend Clear> to clear the text from line 1.
2. With font size set at the default of 9, enter MULTIPLE on line 1, then press <Enter>
3. Press <Shift> + < > > three times to increase the font size to 12.
4. Enter FONT on line 2, then press <Enter>.
5. Press <Shift> + < ? > 8 times to decrease the font size from 12 to 4.
6. Enter SIZES on line 3.
7. Press <Print>.

Table of Contents

Other manuals for Brady TLS2200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brady TLS2200 and is the answer not in the manual?

Brady TLS2200 Specifications

General IconGeneral
BrandBrady
ModelTLS2200
CategoryPrinter
LanguageEnglish

Related product manuals