Need help?Do you have a question about the Braeburn 140202 and is the answer not in the manual?
Connect dampers to the zone panel, ensuring total VA does not exceed 35 VA at 24 VAC.
Connect thermostats to the zone panel. C terminal is required for thermostat power.
Connect the transformer to the zone panel, sizing it for damper requirements. Max panel power is 35 VA.
Connect a conventional heating system to the zone panel, noting specific stage connections and jumper settings.
Connect a heat pump system to the zone panel, detailing thermostat and DIP switch configurations for control.
Connect dampers to the zone panel, ensuring total VA does not exceed 35 VA at 24 VAC.
Connect thermostats to the zone panel. C terminal is required for thermostat power.
Connect the transformer to the zone panel, sizing it for damper requirements. Max panel power is 35 VA.
Connect a conventional heating system to the zone panel, noting specific stage connections and jumper settings.
Connect a heat pump system to the zone panel, detailing thermostat and DIP switch configurations for control.
General| Brand | Braeburn |
|---|---|
| Model | 140202 |
| Category | Network Router |
| Language | English |
To Next Page