Braeburn 5320 - Page 17

17 User Manual
Setting Individual Days (7 Day Residential)
1. Touch the PROG TouchPad
™
. The display will switch to
programming mode. M (Monday) will be displayed and the
hour will be ashing.
2. Touch SYSTEM to select HEAT or COOL.
3. Touch DAY/TIME to select the day you would like to program.
4. Press the SpeedBar
®
up or down to adjust the hour for the
MORN (morning) event. Touch NEXT.
5. Press the SpeedBar up or down to adjust the minute for the
MORN event. Touch NEXT.
6. Press the SpeedBar up or down to adjust the temperature
for the MORN event. Touch NEXT.
7. Press the SpeedBar up or down to adjust the fan setting for
the MORN event. Touch NEXT.
8. Repeat steps 4-7 for your DAY, EVE and NIGHT events.
9. If needed, repeat steps 3-7 to select a different day to program.
10. If needed, repeat steps 2-9 to program the opposite
mode (HEAT or COOL).
11. Touch RETURN to exit.