User Manual 22
Setting the FAN Control Mode
The Fan Control has 4 modes of operation – AUTO, ON, CIRC and PROG. The mode can be selected by touching
the FAN TouchPad
™
to scroll through the different modes.
NOTE: Depending on how your thermostat was configured, some fan modes may not be available.
AUTO The system fan will run only when your heating or
cooling system is running.
ON The system fan will run continually.
CIRC The system fan will run intermittently to help circulate
air and provide more even temperature distribution when
the heating or cooling system is not active.
PROG The system fan will function in the AUTO or ON modes
depending on your program schedule.
To Next Page
Loading...
