Braeburn 6100 - Specifications; Installation and Wiring

This thermostat is compatible with:
  • Singlestageheat/coolconventionalandheatpumpsystems
  • Conventionalsystemsupto3stagesofheatingand2stagesofcooling(6300/6400only)
  • Heatpumpsystemsupto4stagesofheatingand2stagesofcooling(6300/6400only)
  • 250–750millivoltheatingonlysystems
Electrical and control specifications:
  • ElectricalRating:24VoltAC
  • 1ampmaximumloadperterminal
  • ACPower:18–30VoltsAC
  • DCPower:3.0VoltDC(2“AA”AlkalineBatteriesIncluded)
  • ControlRange:45°–90°F(7°–32°C)
  • TemperatureAccuracy:+/-1°F(+/-.5°C)
  • OutdoorTemperatureDisplayRange:-40°-120°F(-40°-49°C)
Humidification Specifications (6400 Only)
  • HumidicationControlRange:10%-50%RH
  • DehumidicationControlRange:40%-80%RH
Terminations
  • 6100:G,Rc,Rh,W,O/B,Y,C,S1,S2
  • 6300:A,G,Rc,Rh,W1/E/AUX1,W2/AUX2,W3/O/B,Y1,Y2,C,L,S1,S2
  • 6400:H,A/D,G,Rc,Rh,W1/E/AUX1,W2/AUX2,W3/O/B,Y1,Y2,C,L,S1,S2
Thermostat Location
Installthethermostatapproximately5feet(1.5m)abovetheoorinanareathathasagoodamountofair
circulationandmaintainsanaverageroomtemperature.
Avoidinstallationinlocationswherethethermostatcanbeaffectedbydrafts,deadairspots,hotorcoldair
ducts,sunlight,appliances,concealedpipes,chimneysandoutsidewalls.
Installer Guide 2
Warning
Disconnect power before beginning installation.
2
Installation and Wiring
1
Specifications