Braeburn 7320 Installer's Guide

Installer Guide
Universal Programmable Smart Wi-Fi Thermostat
1 Specifications 2 Installation and Wiring 3 Quick Reference
4 Installer Settings 5 Wireless Remote Sensors 6 System Testing
To prevent damage to the thermostat, never use a sharp instrument
to press the touchscreen keys. Always press keys with your fingers.
Attention
• Possible electric shock or damage to equipment can occur.
• Disconnect power before beginning installation.
Caution
This thermostat requires 24 Volt AC Power or 2 properly installed “AA” Alkaline
batteries for proper operation. If connecting this thermostat to a Wi-Fi network,
a 24 VAC common (C wire) is required.
For use only as described in this manual. Any other use will void warranty.
7320 Up to 3 Heat / 2 Cool Heat Pump
Up to 2 Heat / 2 Cool Conventional
with wireless Humidity Control*
Warning
For installation by experienced service technicians only.
®
This thermostat is compatible with:
  • Singlestageheat/coolconventionalandheatpumpsystems
  • Conventionalsystemsupto2stagesofheatingand2stagesofcooling
  • Heatpumpsystemsupto3stagesofheatingand2stagesofcooling
Electrical and control specifications:
  • ElectricalRating:24VoltAC
  • 1ampmaximumloadperterminal,6ampmaximumload
  • ACPower:18–30VoltsAC
  • DCPower:3.0VoltDC(2“AA”AlkalineBatteriesIncluded)
  • ControlRange:45°–90°F(7°–32°C)
  • TemperatureAccuracy:+/-1°F(+/-.5°C)
  • OutdoorTemperatureDisplayRange:-40°-120°F(-40°-49°C)
Terminations:
  Rc,Rh,C,W2/AUX,W1/E,L,A,O/B,G,Y2,Y1,K,S2,S1
1
Specifications
7320-100-01
Model number is located on back of thermostat.
*WirelessHumidityControlrequiresaccessorymodel7330.
See Wi-Fi Setup Guide for Wi-Fi Setup Instructions
TM

Braeburn 7320 Specifications

General

Brand	Braeburn
Model	7320
Category	Thermostat
Language	English