100-214-276 Rev. 3 2-13
2000X aed Actuator Chapter 2: Introduction to the 2000X aed Actuator
Instruction Manual Glossary of Terms
-/+ S/R Trg D: The distance at which the trigger occurred.
-/+ S/R Time: The weld time reached during the weld.
Weld Count: Count of acceptable weld cycles.
Weld Energy: The energy specified to be applied to the part during the weld cycle.
Weld History: The last 50 weld summary data lines are saved.
Weld Scale: The power bar LED scale during weld.
Weld State: A screen message showing the current state of the welder during or before the pro-
cess. The list of messages are shown in the Run Screen section.
Weld Results: A one-line summary of information concerning the last weld cycle.
Weld Time: The time for which ultrasonics are on.
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version
To Next Page
Loading...
