To Next PageTo Next Page
Need help?Do you have a question about the Branson 2000X Series and is the answer not in the manual?
General| Frequency | 20 kHz |
|---|---|
| Overload Protection | Yes |
| Frequency Range | 19.5 kHz to 20.5 kHz |
| Voltage | 50/60 Hz |
| Operating Temperature | 0 - 40° C |
Explains safety symbols and warnings found in the manual and on the product.
Outlines essential precautions for safe operation, maintenance, and electrical safety.
Details the terms and conditions of the product warranty and sale.
Provides contact information and procedures for obtaining technical assistance and support.
Guides the user through the process of obtaining authorization and returning equipment for service.
Describes the various configurations of the 2000X aed Actuator that this manual covers.
Presents a general description of the 2000X aed Actuator and its role in the welding system.
Lists and explains the key features and capabilities of the ultrasonic welding system.
Details the front panel controls and indicators on the 2000X aed Actuator.
Explains the principles of ultrasonic plastics welding and the components of the system.
Defines technical terminology used throughout the manual for clarity.
Provides guidelines and environmental specifications for safe shipping and handling of the unit.
Outlines the procedure for inspecting the actuator and its packaging upon delivery.
Details how to safely unpack the different actuator assembly configurations.
Introduces the chapter covering the basic installation and setup of the 2000X Actuator.
Covers procedures for safely handling, unpacking, and inspecting the Actuator and components.
Guides the user to inventory all included small parts, kits, and cables.
Lists necessary requirements for installation, including location, power, and environmental specs.
Provides step-by-step instructions for mounting, connecting, and testing the Actuator.
Details the required conditions, inputs, and environmental specifications for operation.
Outlines key performance metrics such as welding force, stroke, and speed.
Describes the physical components, mechanisms, and controls of the Actuator.
Explains how to operate the weld cycle using the 2000X aed Actuator controls.
Guides the user through setting up initial parameters such as air pressure and downspeed.
Provides detailed steps for performing a weld cycle with the Actuator.
Discusses calibration requirements and when to contact Branson for assistance.
Outlines routine maintenance tasks for ensuring long-term operation and reliability.
Lists available accessories and spare parts with their respective EDP numbers.
