3-2 100-214-276 Rev. 3
Chapter 3: Delivery and Handling
Receiving
3.2 Receiving
Branson Actuator units are carefully checked and packed before dispatch. It is recommended,
however, that you follow the procedure below upon receiving your Actuator.
Inspect the Actuator when it is delivered:
If the goods delivered have been damaged during shipping, please contact the
forwarding agent immediately. Retain packing material (for possible inspection or
for sending back the unit).
The Actuator and the Power Supply are heavy. Handling, unpacking, and installa-
tion may require the assistance of a colleague or the use of lifting platforms or
hoists
Step: Action:
1
Check the equipment immediately after delivery to ensure that they have
not been damaged during transport.
2
Verify that all parts are complete according to the delivery note.
3
Determine if any component has become loose during shipping and, if
necessary, tighten screws.
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version
To Next Page
Loading...
Need help?
General
