Branson 2000X Series User Manual

100-214-276 Rev. 3 1-13
2000X aed Actuator Chapter 1: Safety and Support
Instruction Manual Returning Equipment for Repair
1.5.3 Departments to Contact
Call your local Branson Representative, or contact Branson by calling, and asking for the appro-
priate department as indicated in Table 1.2:
Branson Contacts below.
Table 1.2 Branson Contacts
My Local Branson Representative’s name is:
__________________________________________________
I can reach this representative at:
___________________________________________________________________
What you need help with or information about . . . Whom to Call
At this Phone
Number
Information about new welding systems or components
Your local Branson Rep or
Branson Customer Service
203-796-0400
Ext 384
Application and Setup questions on the
welding system
Welding Applications Lab
203-796-0400
Ext 368
Application assistance on the Horns and
Tooling
ATG Lab
203-796-0400
Ext 495
Technical questions about the welding system Welding Product Support
203-796-0400
Ext 355
Technical questions about Horns and Tooling ATG Lab
203-796-0400
Ext 495
Ordering new parts Parts Store 877-330-0406
RGA’s, Request for Repair, Status of a Repair Welding Repair Department 877-330-0405
System Automation/Hookup Information Product Support
203-796-0400
Ext 355
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version

Branson 2000X Series Specifications

General

Frequency	20 kHz
Overload Protection	Yes
Frequency Range	19.5 kHz to 20.5 kHz
Voltage	50/60 Hz
Operating Temperature	0 - 40° C