100-214-276 Rev. 3 iii
2000X aed Actuator
Instruction Manual
4.5.11 User I/O Interface - - - - - - - - - - - - - - - - - - - - - - 4 - 26
4.5.12 Input Power Plug- - - - - - - - - - - - - - - - - - - - - - - 4 - 29
4.5.13 User I/O DIP Switch (SW1) - - - - - - - - - - - - - - - - - - 4 - 30
4.5.14 Module Options DIP Switch- - - - - - - - - - - - - - - - - - 4 - 30
4.6 Guards and Safety Equipment - - - - - - - - - - - - - - - - - 4 - 31
4.6.1 Emergency Stop Control - - - - - - - - - - - - - - - - - - - 4 - 31
4.7 Rack Mount Installation- - - - - - - - - - - - - - - - - - - - - 4 - 32
4.8 Assemble the Acoustic Stack- - - - - - - - - - - - - - - - - - 4 - 33
4.8.1 For a 15 kHz System - - - - - - - - - - - - - - - - - - - - - 4 - 34
4.8.2 For a 20kHz System - - - - - - - - - - - - - - - - - - - - - 4 - 34
4.8.3 For a 30kHz System - - - - - - - - - - - - - - - - - - - - - 4 - 35
4.8.4 For a 40kHz System - - - - - - - - - - - - - - - - - - - - - 4 - 35
4.8.5 Assembling the Acoustic Stack - - - - - - - - - - - - - - - - 4 - 36
4.8.6 Connecting Tip to Horn- - - - - - - - - - - - - - - - - - - - 4 - 37
4.8.7 Installing the Stack in the Actuator - - - - - - - - - - - - - - 4 - 38
4.9 Mounting the Fixture on the Branson Base- - - - - - - - - - - 4 - 41
4.10 Testing the Installation - - - - - - - - - - - - - - - - - - - - - 4 - 42
4.11 Still Need Help? - - - - - - - - - - - - - - - - - - - - - - - - - 4 - 43
Chapter 5: Technical Specifications
5.1 Technical Specifications - - - - - - - - - - - - - - - - - - - - -5 - 1
5.1.1 Requirement Specifications- - - - - - - - - - - - - - - - - - -5 - 1
5.1.2 Performance Specifications- - - - - - - - - - - - - - - - - - -5 - 2
5.2 Physical Description - - - - - - - - - - - - - - - - - - - - - - -5 - 3
5.2.1 Standard Items- - - - - - - - - - - - - - - - - - - - - - - - -5 - 3
Chapter 6: Operation
6.1 Actuator Controls- - - - - - - - - - - - - - - - - - - - - - - - -6 - 1
6.2 Initial Actuator Settings- - - - - - - - - - - - - - - - - - - - - -6 - 2
6.2.1 Regulated Air Pressure and Air Pressure Gauge - - - - - - - -6 - 2
6.2.2 Factory Air Source - - - - - - - - - - - - - - - - - - - - - - -6 - 3
6.2.3 Downspeed Control - - - - - - - - - - - - - - - - - - - - - -6 - 3
6.2.4 Actuator Alignment and Height (Horn travel) - - - - - - - - - -6 - 4
6.2.5 Mechanical Stop - - - - - - - - - - - - - - - - - - - - - - - -6 - 4
6.2.6 Emergency Stop - - - - - - - - - - - - - - - - - - - - - - - -6 - 5
6.3 Operating the Actuator - - - - - - - - - - - - - - - - - - - - - -6 - 5
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version
To Next Page
Loading...
Need help?
General
